旧バージョンのドキュメントを参照しています。最新のドキュメントはこちらをご参照ください。

Load Balancing Reference

Kong provides multiple ways of load balancing requests to multiple backend services: the default DNS-based method, and an advanced set of load-balancing algorithms using the Upstream entity.

The DNS load balancer is enabled by default and is limited to round-robin load-balancing. The upstream entity has health-check and circuit-breaker functionalities, besides the more advanced algorithms like least-connections, consistent-hashing, and lowest-latency.

Refer to the DNS caveats depending on your infrastructure .

DNS-based load balancing

Every Service that has been defined with a host containing a hostname (instead of an IP address) will automatically use DNS-based load balancing if the name resolves to multiple IP addresses.

The DNS record ttl setting (time to live) determines how often the information is refreshed. When using a ttl of 0, every request will be resolved using its own DNS query. Obviously this will have a performance penalty, but the latency of updates/changes will be very low.

The round-robin algorithm used, weighted or not, depends on the DNS record type of the hostname.

A records

An A record contains one or more IP addresses. Hence, when a hostname resolves to an A record, each backend service must have its own IP address.

Because there is no weight information, all entries will be treated as equally weighted in the load balancer, and the balancer will do a straight forward round-robin.

SRV records

An SRV record contains weight and port information for all of its IP addresses. A backend service can be identified by a unique combination of IP address and port number. Hence, a single IP address can host multiple instances of the same service on different ports.

SRV records also feature a priority property. Kong will only use the entries with the highest priority, and ignore all others (note that the “highest priority” in an SRV record actually is the record with the lowest priority value).

Because the weight information is available, each entry will get its own weight in the load balancer and it will perform a weighted round-robin.

Similarly, any given port information will be overridden by the port information from the DNS server. If a Service has attributes host=myhost.com and port=123, and myhost.com resolves to an SRV record with 127.0.0.1:456, then the request will be proxied to http://127.0.0.1:456/somepath, as port 123 will be overridden by 456.

DNS caveats

Kong will trust the nameserver. This means that information retrieved via a DNS query will have higher precedence than the configured values. This mostly relates to SRV records which carry port and weight information.
Whenever the DNS record is refreshed a list is generated to handle the weighting properly. Try to keep the weights as multiples of each other to keep the algorithm performant, e.g., 2 weights of 17 and 31 would result in a structure with 527 entries, whereas weights 16 and 32 (or their smallest relative counterparts 1 and 2) would result in a structure with merely 3 entries. This is especially relevant with a very small (or even 0) ttl value.
DNS is carried over UDP with a default limit of 512 Bytes. If there are many entries to be returned, a DNS Server will respond with partial data and set a truncate flag, indicating there are more entries unsent. DNS clients, including Kong’s, will then make a second request over TCP to retrieve the full list of entries.
Some nameservers by default do not respond with the truncate flag, but trim the response to be under 512 byte UDP size.
- Consul is an example. Consul, in its default configuration, returns up to the first three entries only, and does not set the truncate flag to indicate there are remaining entries unsent. Consul includes an option to enable the truncate flag. Please refer to Consul documentation for more information.
If a deployed nameserver does not provide the truncate flag, the pool of upstream instances might be loaded inconsistently. The Kong node is effectively unaware of some of the instances, due to the limited information provided by the nameserver. To mitigate this, use a different nameserver, use IP addresses instead of names, or make sure you use enough Kong nodes to still keep all upstream services in use.
When the nameserver returns a 3 name error, then that is a valid response for Kong. If this is unexpected, first validate the correct name is being queried for, and second check your nameserver configuration.
The initial pick of an IP address from a DNS record (A or SRV) is not randomized. So when using records with a ttl of 0, the nameserver is expected to randomize the record entries.

Advanced load-balancing

Advanced load-balancing algorithms are available through the upstream entity.

When using these load balancers, the adding and removing of backend services will be handled by Kong, and no DNS updates will be necessary. Kong will act as the service registry.

Configuring the load balancers is done through the upstream and target entities.

upstream: a ‘virtual hostname’ which can be used in a Service host field, e.g., an upstream named weather.v2.service would get all requests from a service with host=weather.v2.service. The upstream carries the properties that determine the load-balancing behaviour (as well as the health-checks and circuit-breaker configuration).
target: an IP address or hostname with a port number where a backend service resides, e.g. “192.168.100.12:80”. Each target gets an additional weight to indicate the relative load it gets. IP addresses can be in both IPv4 and IPv6 format.

Upstream

Each upstream can have many target entries attached to it, and requests proxied to the ‘virtual hostname’ will be load balanced over the targets.

Adding and removing targets can be done with a simple HTTP request on the Admin API. This operation is relatively cheap. Changing the upstream itself is more expensive as the balancer will need to be rebuilt when the number of slots change for example.

Detailed information on adding and manipulating upstreams is available in the upstream section of the Admin API reference.

Target

A target is an IP address/hostname with a port that identifies an instance of a backend service. Each upstream can have many targets. Detailed information on adding and manipulating targets is available in the target section of the Admin API reference.

The targets will be automatically cleaned when there are 10x more inactive entries than active ones. Cleaning will involve rebuilding the balancer, and hence is more expensive than just adding a target entry.

A target can also have a hostname instead of an IP address. In that case the name will be resolved and all entries found will individually be added to the ring balancer, e.g., adding api.host.com:123 with weight=100. The name ‘api.host.com’ resolves to an A record with 2 IP addresses. Then both IP addresses will be added as target, each getting weight=100 and port 123. NOTE: the weight is used for the individual entries, not for the whole!

Would it resolve to an SRV record, then also the port and weight fields from the DNS record would be picked up, and would overrule the given port 123 and weight=100.

Note: similar to the DNS based load-balancing, only the highest priority entries (the lowest values) in an SRV record will be used.

The balancer will honor the DNS record’s ttl setting, upon expiry it queries the nameserver and updates the balancer.

Exception: When a DNS record has ttl=0, the hostname will be added as a single target, with the specified weight. Upon every proxied request to this target it will query the nameserver again.

Fighting load-balancers

As described in the target paragraph, the targets can be specified as hostnames. In orchestrated environments like k8s or docker-compose, the IP addresses and ports are mostly ephemeral and SRV records must be used to find the appropriate backends and to stay up to date.

On a DNS level many infrastructure tools can also provide load-balancing type features. These are mostly service-discovery tools that will have their own health-checks and will randomize DNS records, or only return a small subset of available peers.

The Kong load balancers and the DNS based tools often fight each other. The nameserver will provide as little information as possible to force clients to follow its scheme, where Kong tries to get all backends to properly set up its load balancers and health-checks.

In your environment, ensure that:

the nameserver sets the truncation flag on the responses when it cannot fit all records in the UDP response. This will force Kong to retry using TCP.
TCP queries are allowed on the nameserver.

Balancing algorithms

The load balancers support the following load-balancing algorithms:

round-robin
consistent-hashing
least-connections

These algorithms are only available when using the upstream entity, see Advanced load-balancing.

Note: for all these algorithms it is important to understand how the weights and ports of the individual backends are being set up. See the Target paragraph on how the actual weights and ports are being determined based on user configuration as well DNS results.

Round-Robin

The round-robin algorithm will be done in a weighted manner. It will be identical in results to the DNS based load-balancing, but due to it being an upstream the additional features for health-checks and circuit-breakers will be available in this case.

When choosing this algorithm, consider the following:

good distribution of requests.
fairly static, as only DNS updates or target updates can influence the distribution of traffic.
does not improve cache-hit ratios.

Consistent-Hashing

With the consistent-hashing algorithm a configurable client-input will be used to calculate a hash-value. This hash-value will then be tied to a specific backend server.

A common example would be to use the consumer as a hash-input. Since this ID is the same for every request from that user, it will ensure that the same user will consistently be dealt with by the same backend server. This will allow for cache optimizations on the backend, since each of the servers only serves a fixed subset of the users, and hence can improve its cache-hit-ratio for user related data.

This algorithm implements the ketama principle to maximize hashing stability and minimize consistency loss upon changes to the list of known backends.

When using the consistent-hashing algorithm, the input for the hash can be either none, consumer, ip, header, or cookie. When set to none, the round-robin scheme will be used, and hashing will be disabled. The consistent-hashing algorithm supports a primary and a fallback hashing attribute; in case the primary fails (e.g., if the primary is set to consumer, but no Consumer is authenticated), the fallback attribute is used. This maximizes upstream cache hits.

Supported hashing attributes are:

none: Do not use consistent-hashing; use round-robin instead (default).
consumer: Use the Consumer ID as the hash input. If no Consumer ID is available, it will fall back on the Credential ID (for example, in case of an external authentication mechanism like LDAP).
ip: Use the originating IP address as the hash input. Review the configuration settings for determining the real IP when using this.
header: Use a specified header as the hash input. The header name is specified in either hash_on_header or hash_fallback_header, depending on whether header is a primary or fallback attribute, respectively.
cookie: Use a specified cookie with a specified path as the hash input. The cookie name is specified in the hash_on_cookie field and the path is specified in the hash_on_cookie_path field. If the specified cookie is not present in the request, it will be set by the response. Hence, the hash_fallback setting is invalid if cookie is the primary hashing mechanism. The generated cookie will have a random UUID value. So the first assignment will be random, but then sticks because it is preserved in the cookie.

The consistent-hashing balancer is designed to work both with a single node as well as in a cluster. When using the hash based algorithm it is important that all nodes build the exact same balancer-layout to make sure they all work identical. To do this the balancer must be built in a deterministic way.

When choosing this algorithm, consider the following:

improves backend cache-hit ratios.
requires enough cardinality in the hash-inputs to distribute evenly (for example, hashing on a header that only has 2 possible values does not make sense).
the cookie based approach will work well for browser based requests, but less so for machine-2-machine clients which will often omit the cookie.
avoid using hostnames in the balancer as the balancers might/will slowly diverge because the DNS ttl has only second precision and renewal is determined by when a name is actually requested. On top of this is the issue with some nameservers not returning all entries, which exacerbates this problem. So when using the hashing approach in a Kong cluster, preferably add target entities by their IP address. This problem can be mitigated by balancer rebuilds and higher ttl settings.

Least-Connections

This algorithm keeps track of the number of in-flight requests for each backend. The weights are used to calculate “connection-capacity” of a backend. Requests are routed towards the backend with the highest spare capacity.

When choosing this algorithm, consider the following:

good distribution of traffic.
does not improve cache-hit ratio’s.
more dynamic since slower backends will have more connections open, and hence new requests will be routed to other backends automatically.