コンテンツにスキップ
|
Plugin Hub
report-issue問題を報告する
header icon

Session

By Kong Inc.

このページは、まだ日本語ではご利用いただけません。翻訳中です。

古いプラグインバージョンのドキュメントを閲覧しています。

Looking for the plugin's configuration parameters? You can find them in the Session configuration reference doc.

The Kong Session plugin can be used to manage browser sessions for APIs proxied through the Kong Gateway. It provides configuration and management for session data storage, encryption, renewal, expiry, and sending browser cookies. It is built using lua-resty-session.

How it works

The Session plugin can be configured globally or with an entity (for example, a service or a route) and is always used in conjunction with another Kong authentication plugin. This plugin is intended to work similarly to the multiple authentication setup.

When the Session plugin is enabled in conjunction with an authentication plugin, it runs before credential verification. If no session is found, then the authentication plugin runs again and credentials are checked normally. If the credential verification is successful, then the Session plugin creates a new session for usage with subsequent requests.

When a new request comes in and a session is already present, then the Session plugin attaches the ngx.ctx variables to let the authentication plugin know that authentication has already occurred via session validation. As this configuration is a logical OR scenario, and it’s desired that anonymous access be forbidden, you should configure the Request Termination plugin on an anonymous consumer. Failure to do so allows unauthorized requests. For more information, see multiple authentication.

Set up with a database

The following example uses the Session plugin together with the Key Auth plugin.

  1. Create an example service and a route:

    Issue the following cURL request to create example-service pointing to httpbin.konghq.com, which echoes the request:

    curl -i -X POST \
  --url http://localhost:8001/services/ \
  --data 'name=example-service' \
  --data 'url=https://httpbin.konghq.com/anything'

    Add a route to the service:

    curl -i -X POST \
  --url http://localhost:8001/services/example-service/routes \
  --data 'paths[]=/sessions-test'

    The URL http://localhost:8000/sessions-test now echoes whatever is being requested.

  2. Configure the key-auth plugin for the service.

    Issue the following cURL request to add the key-auth plugin to the service:

    curl -i -X POST \
  --url http://localhost:8001/services/example-service/plugins/ \
  --data 'name=key-auth'

    Be sure to note the created plugin id, which is needed later.

  3. Verify that the key-auth plugin is properly configured.

    Issue the following cURL request to verify that the key-auth plugin is properly configured on the service:

    curl -i -X GET \
  --url http://localhost:8000/sessions-test

    Since the required header or parameter apikey is not specified, and anonymous access is not yet enabled, the response should be 401 Unauthorized.

  4. Create a consumer and an anonymous consumer.

    Every request proxied and authenticated by Kong Gateway must be associated with a consumer. You can now create a consumer named anonymous_users by issuing the following request:

    curl -i -X POST \
  --url http://localhost:8001/consumers/ \
  --data "username=anonymous_users"

    Be sure to note the consumer id, which is needed later.

    Now create a consumer that authenticates via sessions:

    curl -i -X POST \
  --url http://localhost:8001/consumers/ \
  --data "username=fiona"

  5. Provision key-auth credentials for your consumer:

    curl -i -X POST \
  --url http://localhost:8001/consumers/fiona/key-auth/ \
  --data 'key=open_sesame'

  6. Enable anonymous access.

    You can now re-configure the key-auth plugin to permit anonymous access by issuing the following request. Replace the UUIDs in the following example with the id value from previous steps:

    curl -i -X PATCH \
  --url http://localhost:8001/plugins/<your-key-auth-plugin-id> \
  --data "config.anonymous=<anonymous_consumer_id>"

  7. Add the Session plugin to the service:

    curl -X POST http://localhost:8001/services/example-service/plugins \
  --data "name=session"  \
  --data "config.storage=kong" \
  --data "config.cookie_secure=false"

    Note: cookie_secure is true by default, and should always be true, but is set to false for the sake of this demo to avoid using HTTPS.

  8. Add the Request Termination plugin.

    To disable anonymous access to only allow users access via sessions or via authentication credentials, enable the Request Termination plugin:

    curl -X POST http://localhost:8001/services/example-service/plugins \
  --data "name=request-termination"  \
  --data "config.status_code=403" \
  --data "config.message=So long and thanks for all the fish!" \
  --data "consumer.id=<anonymous_consumer_id>"

Set up without a database

Add the following snippet to your declarative config file:

services:
  - name: example-service
    url: https://httpbin.konghq.com/anything

routes:
  - service: example-service
    paths: ['/sessions-test']

consumers:
  - username: anonymous_users
    # manually set to fixed uuid in order to use it in key-auth plugin
    id: 81823632-10c0-4098-a4f7-31062520c1e6
  - username: fiona

keyauth_credentials:
  - consumer: fiona
    key: open_sesame

plugins:
  - name: key-auth
    service: example-service
    config:
      # using the anonymous consumer fixed uuid (can't use the username)
      anonymous: 81823632-10c0-4098-a4f7-31062520c1e6
      # cookie_secure is true by default, and should always be true,
      # but is set to false for the sake of this demo in order to avoid using HTTPS.
      cookie_secure: false
  - name: session
    config:
      storage: kong
      cookie_secure: false
  - name: request-termination
    service: example-service
    consumer: anonymous_users
    config:
      status_code: 403
      message: 'So long and thanks for all the fish!'

Verification

  1. Check that anonymous requests are disabled:

    curl -i -X GET \
  --url http://localhost:8000/sessions-test

    Should return 403.

  2. Verify that a user can authenticate via sessions:

    curl -i -X GET \
  --url http://localhost:8000/sessions-test?apikey=open_sesame

    The response should now have the Set-Cookie header. Make sure that this cookie works.

    If cookie looks like this:

    Set-Cookie: session=emjbJ3MdyDsoDUkqmemFqw..|1544654411|4QMKAE3I-jFSgmvjWApDRmZHMB8.; Path=/; SameSite=Strict; HttpOnly

    Use it like this:

    curl -i -X GET \
  --url http://localhost:8000/sessions-test \
  -H "cookie:session=emjbJ3MdyDsoDUkqmemFqw..|1544654411|4QMKAE3I-jFSgmvjWApDRmZHMB8."

    This request should succeed and the Set-Cookie response header does not appear until the renewal period.

  3. Navigate to http://localhost:8000/sessions-test.

    If the cookie is attached to the browser session, it should return the code 403 and the message “So long and thanks for all the fish!”.

  4. Navigate to http://localhost:8000/sessions-test?apikey=open_sesame.

    It should return 200 and be authenticated via the key-auth key query parameter.

  5. Navigate to http://localhost:8000/sessions-test.

    It can now use the session cookie that is granted by the Session plugin.

Defaults

By default, the Kong Session plugin favors security using a Secure, HTTPOnly, Samesite=Strict cookie. cookie_domain is automatically set using Nginx variable host, but can be overridden.

Session data storage

The session data can be stored in the cookie itself (encrypted) by setting storage to cookie, or inside Kong by setting storage to kong. The session data stores these context variables:

ngx.ctx.authenticated_consumer.id
ngx.ctx.authenticated_credential.id
ngx.ctx.authenticated_groups

The plugin also sets a ngx.ctx.authenticated_session for communication between the access and header_filter phases in the plugin.

Groups

Authenticated groups are stored on ngx.ctx.authenticated_groups from other authentication plugins and the session plugin will store them in the data of the current session. Since the session plugin runs before authentication plugins, it also sets authenticated_groups associated headers.

Kong storage adapter

The Session plugin extends the functionality of lua-resty-session with its own session data storage adapter when storage=kong. This stores encrypted session data into the current database strategy and the cookie does not contain any session data. Data stored in the database is encrypted and the cookie contains only the session id, expiration time, and HMAC signature. Sessions use the built-in Kong DAO ttl mechanism that destroys sessions after specified rolling_timeout unless renewal occurs during normal browser activity. Log out the application via XHR request (or something similar) to manually handle the redirects.

Logging out

It is typical to provide users the ability to log out (i.e., to manually destroy) their current session. Logging out is possible with either query parameters or POST parameters in the request URL. The config’s logout_methods allows the plugin to limit logging out based on the HTTP verb. When logout_query_arg is set, it checks the presence of the URL query parameter specified, and likewise when logout_post_arg is set, it checks the presence of the specified variable in the request body. Allowed HTTP verbs are GET, DELETE, and POST. When there is a session present and the incoming request is a logout request, the Kong Session plugin returns a 200 before continuing in the plugin run loop, and the request does not continue to the upstream.

Known limitations

Due to limitations of OpenResty, the header_filter phase cannot connect to the database, which poses a problem for initial retrieval of a cookie (fresh session). There is a small window of time where the cookie is sent to client, but the database insert has not been committed yet because the database call is in a ngx.timer thread. The current workaround is to wait for some interval of time (~100-500ms) after Set-Cookie header is sent to the client before making subsequent requests. This is not a problem during session renewal period as renew happens in access phase.