旧バージョンのドキュメントを参照しています。最新のドキュメントはこちらをご参照ください。

Data plane on Kubernetes

On Kubernetes the Dataplane entity is automatically created for you, and because transparent proxying is used to communicate between the service and the sidecar proxy, no code changes are required in your applications.

The Kong Mesh control plane injects a kuma-sidecar container into your Pod’s container. If you’re not using the CNI, it also injects a kuma-init into initContainers to setup transparent proxying.

You can control whether Kong Mesh automatically injects the data plane proxy by labeling either the Namespace or the Pod with kuma.io/sidecar-injection=enabled, e.g.

apiVersion: v1
kind: Namespace
metadata:
  name: kuma-example
  labels:
    # inject Kong Mesh sidecar into every Pod in that Namespace,
    # unless a user explicitly opts out on per-Pod basis
    kuma.io/sidecar-injection: enabled

To opt out of data-plane injection into a particular Pod, you need to label it with kuma.io/sidecar-injection=disabled, e.g.

apiVersion: apps/v1
kind: Deployment
metadata:
  name: example-app
  namespace: kuma-example
spec:
  ...
  template:
    metadata:
      ...
      labels:
        # indicate to Kong Mesh that this Pod doesn't need a sidecar
        kuma.io/sidecar-injection: disabled
    spec:
      containers:
        ...

In previous versions the recommended way was to use annotations. While annotations are still supported, we strongly recommend using labels. This is the only way to guarantee that applications can only be started with sidecar.

Once your pod is running you can see the data plane CRD that matches it using kubectl:

kubectl get dataplanes <podName>

Tag generation

When Dataplane entities are automatically created, all labels from Pod are converted into Dataplane tags. Labels with keys that contains kuma.io/ are not converted because they are reserved to Kong Mesh. The following tags are added automatically and cannot be overridden using Pod labels.

kuma.io/service: Identifies the service name based on a Service that selects a Pod. This will be of format <name>_<namespace>_svc_<port> where <name>, <namespace> and <port> are from the Kubernetes service that is associated with this particular pod. When a pod is spawned without being associated with any Kubernetes Service resource the data plane tag will be kuma.io/service: <name>_<namespace>_svc, where <name> and<namespace> are extracted from the Pod resource metadata.
kuma.io/zone: Identifies the zone name in a multi-zone deployment.
kuma.io/protocol: Identifies the protocol that was defined by the appProtocol field on the Service that selects the Pod.
k8s.kuma.io/namespace: Identifies the Pod’s namespace. Example: kuma-demo.
k8s.kuma.io/service-name: Identifies the name of Kubernetes Service that selects the Pod. Example: demo-app.
k8s.kuma.io/service-port: Identifies the port of Kubernetes Service that selects the Pod. Example: 80.

If a Kubernetes service exposes more than 1 port, multiple inbounds will be generated all with different kuma.io/service.

If a pod is attached to more than one Kubernetes service, multiple inbounds will also be generated.

Example

apiVersion: v1
kind: Pod
metadata: 
  name: my-app
  namespace: my-namespace
  labels:
    foo: bar
    app: my-app
spec:
  # ...
---
apiVersion: v1
kind: Service
metadata:
  name: my-service
  namespace: my-namespace
spec:
  selector:
    app: my-app
  type: ClusterIP
  ports:
    - name: port1
      protocol: TCP
      appProtocol: http
      port: 80
      targetPort: 8080
    - name: port2
      protocol: TCP
      appProtocol: grpc
      port: 1200
      targetPort: 8081
---
apiVersion: v1
kind: Service
metadata:
  name: my-other-service
  namespace: my-namespace
spec:
  selector:
    foo: bar 
  type: ClusterIP
  ports:
    - protocol: TCP
      appProtocol: http
      port: 81
      targetPort: 8080

Will generate the following inbounds in your Kong Mesh dataplane:

...
inbound:
  - port: 8080
    tags:
      kuma.io/protocol: http
      kuma.io/service: my-service_my-namespace_svc_80
      k8s.kuma.io/service-name: my-service
      k8s.kuma.io/service-port: "80"
      k8s.kuma.io/namespace: my-namespace
      # Labels coming from your pod
      app: my-app
      foo: bar
  - port: 8081
    tags:
      kuma.io/protocol: grpc
      kuma.io/service: my-service_my-namespace_svc_1200
      k8s.kuma.io/service-name: my-service
      k8s.kuma.io/service-port: "1200"
      k8s.kuma.io/namespace: my-namespace
      # Labels coming from your pod
      app: my-app
      foo: bar
  - port: 8080
    tags:
      kuma.io/protocol: http
      kuma.io/service: my-other-service_my-namespace_svc_81
      k8s.kuma.io/service-name: my-other-service
      k8s.kuma.io/service-port: "81"
      k8s.kuma.io/namespace: my-namespace
      # Labels coming from your pod
      app: my-app
      foo: bar

Notice how kuma.io/service is built on <serviceName>_<namespace>_svc_<port> and kuma.io/protocol is the appProtocol field of your service entry.

Capabilities

The only required capability for the sidecar is NET_BIND_SERVICE. Use ContainerPatch to control capabilities for the sidecar.

Lifecycle

Joining the mesh

On Kubernetes, Dataplane resource is automatically created by kuma-cp. For each Pod with sidecar-injection label, a new Dataplane resource will be created.

To join the mesh in a graceful way, we need to first make sure the application is ready to serve traffic before it can be considered a valid traffic destination.

Init containers

Due to the way that Kong Mesh implements transparent proxying and sidecars in Kubernetes, network calls from init containers while running a mesh can be a challenge.

Network calls to outside of the mesh

The common pitfall is the idea that it’s possible to order init containers so that the mesh init container is run after other init containers. However, when injecting these init containers into a Pod via webhooks, such as the Vault init container, there is no assurance of the order. The ordering of init containers also doesn’t provide a solution when the Kong Mesh CNI is used, as traffic redirection to the sidecar occurs even before any init container runs.

To solve this issue, start the init container with a specific user ID and exclude specific ports from interception. Remember also about excluding port of DNS interception. Here is an example of annotations to enable HTTPS traffic for a container running as user id 1234.

apiVersion: v1
king: Deployment
metadata:
  name: my-deployment
spec:
  template:
    metadata:
      annotations:
        traffic.kuma.io/exclude-outbound-tcp-ports-for-uids: "443:1234"
        traffic.kuma.io/exclude-outbound-udp-ports-for-uids: "53:1234"
    spec:
      initContainers:
      - name: my-init-container
        ...
        securityContext:
          runAsUser: 1234

Network calls inside the mesh with mTLS enabled

In this scenario, using the init container is simply impossible because kuma-dp is responsible for encrypting the traffic and only runs after all init containers have exited.

Leaving the mesh

To leave the mesh in a graceful shutdown, we need to remove the traffic destination from all the clients before shutting it down.

When the Kong Mesh sidecar receives a SIGTERM signal it:

Starts draining Envoy listeners.
Waits the entire drain time.
Terminates.

While draining, Envoy can still accept connections, however:

It is marked unhealthy on the Envoy Admin /ready endpoint.
It sends connection: close for HTTP/1.1 requests and the GOAWAY frame for HTTP/2. This forces clients to close their connection and reconnect to the new instance.

You can read the Kubernetes docs to learn how Kubernetes handles the Pod lifecycle. Here is the summary including the parts relevant for Kong Mesh.

Whenever a user or system deletes a Pod, Kubernetes does the following:

It marks the Pod as terminated.
For every container concurrently it:
1. Executes any pre stop hook if defined.
2. Sends a SIGTERM signal.
3. Waits until container is terminated for maximum of graceful termination time (by default 60s).
4. Sends a SIGKILL to the container.
It removes the Pod object from the system.

When Pod is marked as terminated, Kong Mesh, the CP marks the Dataplane object unhealthy, which triggers a configuration update to all the clients in order to remove it as a destination. This can take a couple of seconds depending on the size of the mesh, resources available to the CP, XDS configuration interval, etc.

If the application served by the Kong Mesh sidecar quits immediately after the SIGTERM signal, there is a high chance that clients will still try to send traffic to this destination.

To mitigate this, we need to either

Support graceful shutdown in the application. For example, the application should wait X seconds to exit after receiving the first SIGTERM signal.

Add a pre-stop hook to postpone stopping the application container. Example:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: redis
spec:
  template:
    spec:
      containers:
      - name: redis
        image: "redis"
        lifecycle:
          preStop:
            exec:
              command: ["/bin/sleep", "15"]

When a Pod is deleted, its matching Dataplane resource is deleted as well. This is possible thanks to the owner reference set on the Dataplane resource.

Custom Container Configuration

If you want to modify the default container configuration you can use the ContainerPatch Kubernetes CRD. It allows configuration of both sidecar and init containers. ContainerPatch resources are namespace scoped and can only be applied in a namespace where Kong Mesh CP is running.

In the vast majority of cases you shouldn’t need to override the sidecar and init container configurations. ContainerPatch is a feature which requires good understanding of both Kong Mesh and Kubernetes.

A ContainerPatch specification consists of the list of JSON patch strings that describe the modifications. Consult the entire resource schema.

Example

When using ContainerPath, every value field must be a string containing valid JSON.

apiVersion: kuma.io/v1alpha1
kind: ContainerPatch
metadata:
  name: container-patch-1
  namespace: kong-mesh-system
spec:
  sidecarPatch:
    - op: add
      path: /securityContext/privileged
      value: "true"
    - op: add
      path: /resources/requests/cpu
      value: '"100m"'
    - op: add
      path: /resources/limits
      value: '{
        "cpu": "500m",
        "memory": "256Mi"
      }'
  initPatch:
    - op: add
      path: /securityContext/runAsNonRoot
      value: "true"
    - op: remove
      path: /securityContext/runAsUser

This will change the securityContext section of kuma-sidecar container from:

securityContext:
  runAsGroup: 5678
  runAsUser: 5678

to:

securityContext:
  runAsGroup: 5678
  runAsUser: 5678
  privileged: true

and similarly change the securityContext section of the init container from:

securityContext:
  capabilities:
    add:
    - NET_ADMIN
    - NET_RAW
  runAsGroup: 0
  runAsUser: 0

to:

securityContext:
  capabilities:
    add:
    - NET_ADMIN
    - NET_RAW
  runAsGroup: 0
  runAsNonRoot: true

Resources requests cpu will be changed from:

requests:                                                                                                       │
  cpu: 50m

to:

requests:                                                                                                       │
  cpu: 100m

Resources limits will be changed from:

limits:
  cpu: 1000m
  memory: 512Mi

to:

limits:
  cpu: 500m
  memory: 256Mi

Workload matching

A ContainerPatch is matched to a Pod via an kuma.io/container-patches annotation on the workload. Each annotation may be an ordered list of ContainerPatch names, which will be applied in the order specified.

If a workload refers to a ContainerPatch which does not exist, the injection will explicitly fail and log the failure.

Example

apiVersion: apps/v1
kind: Deployment
metadata:
  namespace: app-ns
  name: app-deployment
spec:
  replicas: 1
  selector:
    matchLabels:
      app: app-deployment
  template:
    metadata:
      labels:
        app: app-deployment
      annotations:
        kuma.io/container-patches: container-patch-1,container-patch-2
    spec: [...]

Default patches

You can configure kuma-cp to apply the list of default patches for workloads which don’t specify their own patches by modifying the containerPatches value from the kuma-dp configuration:

[...]
runtime:
  kubernetes:
    injector:
      containerPatches: [ ]
[...]

If you specify the list of default patches (i.e. ["default-patch-1", "default-patch-2]) but your workload will be annotated with its own list of patches (i.e. ["pod-patch-1", "pod-patch-2]) only the latter will be applied.

To install a CP with env vars you can do:

kumactl install control-plane --env-var "KUMA_RUNTIME_KUBERNETES_INJECTOR_CONTAINER_PATCHES=patch1,patch2"

Error modes and validation

When applying ContainerPatch Kong Mesh will validate that the rendered container spec meets the Kubernetes specification. Kong Mesh will not validate that it is a sane configuration.

If a workload refers to a ContainerPatch which does not exist, the injection will explicitly fail and log the failure.

Direct access to services

By default, on Kubernetes data plane proxies communicate with each other by leveraging the ClusterIP address of the Service resources. Also by default, any request made to another service is automatically load balanced client-side by the data plane proxy that originates the request (they are load balanced by the local Envoy proxy sidecar proxy).

There are situations where we may want to bypass the client-side load balancing and directly access services by using their IP address (ie: in the case of Prometheus wanting to scrape metrics from services by their individual IP address).

When an originating service wants to directly consume other services by their IP address, the originating service’s Deployment resource must include the following annotation:

kuma.io/direct-access-services: Service1, Service2, ServiceN

Where the value is a comma separated list of Kong Mesh services that will be consumed directly. For example:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: example-app
  namespace: kuma-example
spec:
  ...
  template:
    metadata:
      ...
      annotations:
        kuma.io/direct-access-services: "backend_example_svc_1234,backend_example_svc_1235"
    spec:
      containers:
        ...

Note: When using direct access with headless service, destination service will be accessible at: Kong Mesh-service.pod-name.mesh

We can also use * to indicate direct access to every service in the Mesh:

kuma.io/direct-access-services: *

Using * to directly access every service is a resource intensive operation, so we must use it carefully.

Data plane on Kubernetes

Tag generation

Example

Capabilities

Lifecycle

Joining the mesh

Init containers

Network calls to outside of the mesh

Network calls inside the mesh with mTLS enabled

Leaving the mesh

Custom Container Configuration

Example

Workload matching

Example

Default patches

Error modes and validation

Direct access to services

Schema